Author Topic: AR00512 dipstick length  (Read 266 times)

0 Members and 1 Guest are viewing this topic.


  • Full Member
  • ***
  • Posts: 117
AR00512 dipstick length
« on: October 03, 2021, 02:46:54 PM »
Would someone with an AR00512 2L engine mind measuring the length from the dipstick tube cap to the end of the stick per the photo?

Trying to avoid innuendo here, but the cap on my dipstick has obviously been sliding up and down the shaft at some point - resulting in someone using a chemical weld material to bond it back in place. I am thinking it may not be in the right spot. Mine is showing about 302mm, and I suspect it should be a bit less than that.