Alfa Romeo Owners Club of Australia Forum

General Category => General Discussion => Topic started by: gtv6sv on July 12, 2012, 09:22:53 PM

Title: Intake runners on 75 motor
Post by: gtv6sv on July 12, 2012, 09:22:53 PM
hi all, just wondering, don't know if this has been done before or if its a stupid question but is it possible to put the 164 12V intake runners on either a GTV6 or alfa 75 V6 engine?
Title: Re: Intake runners on 75 motor
Post by: Sheldon McIntosh on July 13, 2012, 02:36:40 AM
Fitting the runners is easy, fitting the plenum to the runners is not.  There's a reason it's not done very often.
Title: Re: Intake runners on 75 motor
Post by: aggie57 on July 13, 2012, 12:33:25 PM
http://www.alfabb.com/bb/forums/engine-conversions/171711-non-alfa-engine-conversions.html#post930878
http://www.justacargeek.com/2011/09/highly-modified-1982-alfa-romeo-gtv6.html
Title: Re: Intake runners on 75 motor
Post by: gtv6sv on July 13, 2012, 09:44:26 PM
thanks for the info guys, some works of art on those websites  :)

so in peoples own opinion, what would be easier/more sufficient to do to a GTV6, install a 164 12V engine or use a 75 3.0 and try install the intake runners?

I know its a pain but i love those intake runners on the beautiful V6, especially on my 164 Q ;D