Hi All,
Found the replacement LCD section of the display from a mob in Europe.
The one(s) in my 156GTA(s) are stuffed. These are a direct replacement for the LCD part of the display.
Getting the display out is quite a job, glovebox has to be removed(ish) to get at a wiring plug to allow for the console thing on top of the dashboard to come out.
Replacing the LCD in the Infocentre is a piece of cake, but I had to solder on another resistor to the board to dim the display. This might still come out again to put in a trimpot as the contrast is still a bit bright for my liking, but it could be because I did this at night.
Before and after shots below.
Cheers
Stuart
Hi. Do you have a soldering diagram because i dont know where i solder the resistor. Thanks