Hi all,
Putting more and more V6 stuff in the shed, and have come to the realization that I no longer have space for this stuff, and I'm unlikely to need it in the near future. So, I offer the following for sale.
5 Campanatura (I think that's how it's spelt?) wheels for an alfetta. 4x98 obviously. 4 of these were sand blasted and resprayed in a metallic silver. They were used on my alfetta before I put 5 stud hubs on it about 3 times, the only marks on them are from wheel nuts. The spare is in as is original condition. Three of them have Yokohama advan 32's on them. The other 2 have dunlop formula R's. As the photos show you would expect to get another 2 or so sprints out of these before you will need to replace the tyres. The wheels have all been dry stored, no contact with sunlight for 2 years. Obviously not as sticky as a new set of tyres, but excellent for someone wanting a cheap way onto the track? $300 ono for all 5.
Next I have a set of extractors. Don't know who made them, I bought them from another club member a couple of years ago. These gave a good improvement in the mid and low range, but won't offer huge amounts up top from my experience. Perfect for a standard or mildly tuned motor, however I suspect the inside diameter of the pipes would be too small for a full race setup. I have a standard exhaust system you can have for free with these. May require modification to fit, but it would be a very easy job for your preferred exhaust shop, and means you could keep your entire existing system as is. $250 ono.
2 surplus sets of standard cast iron alfetta headers. No cracks that I could see. free.
1 pair of rear bilstein shock absorbers. Both feel good when compressed/ expanded. One of these however will need a die run over the bottom thread on it, as it is looking pretty sad. Can still get a nut on it, but I definitely would not use it in it's current condition on my car. $100 ono.
Lastly, and not alfetta related, one pair of 75 side skirts with all 4 jacking point covers. Usual sand blasting etc. I will not seperate the jacking point covers, because a) I'm not going to be responsible for breaking them, and b) I want the side skirts gone as well. All or nothing.
No postage sorry, as I just don't have the time, but any other questions please feel free to ask :)
Cheers
Extractors and shock absorbers
headers and side skirts
Matt,
PM sent
Gully
Wheels, side skirts and one pair of the cast headers are accounted for at this stage.
Mat
Umm PM Sent
Cheers
Pep