SOLD!
---------
It's made of special blend of 1/4 inch thick closed cell nitrile vinyl foam rubber designed for aircraft firewalls and bulkheads.
It adds a much cleaner look to your engine compartment, holds up to water, oil, petrol and mildew, much better than the OEM hood pads and keeps the exterior of the hood cool while not reflecting engine heat back down toward your intake. It's actually made for covering the firewall in aircraft and is FAA approved for aircraft.
Compare this hood liner to a factory original or factory replacement.
Factory Liner This Liner
Will it rot? Yes No
Material Latex Foam Vinyl Nitrile
Fire Retardant No Yes
Sound Insulator Yes Yes
Heat Insulator Somewhat Yes
Oil resistant No Yes
Chemical resistant No Yes
Water resistant No Yes
Mildew Resistant No Yes
Washable No Yes
Made of 1/4 inch nitrile vinyl closed cell foam rubber, it will not absorb water or oil. Its light, and is also fire retardant and insulates against sound and heat.
You can wash it and hose it off. Since it's made for aircraft firewalls and bulkheads, it's extremely light and unlike the factory liner will not absorb water and resists mildew. It has a smooth finish and the color is black. Its pre cut to fit all model Alfa GTVs with the same hood design as seen in the photographs. Does not come with red Alfa logo.
I used "Fuller HBF 730 RTV adhesive and sealant" to secure the cover, which works very well.
Hi I would be interested but im in Brissy.
Can it be rolled up for shipping?
It certainly can be - PM me your post code and i'll get you an estimate. I'll be doing it through this website, and it's cheaper if it's done depot-to-depot, but depot-to-door is also possible.
Booking:
http://www.e-go.com.au/home.do;jsessionid=9BD3FB3A0858DAEACB30C53FBE119243
Depots:
http://www.e-go.com.au/depot_locations_inframe.do
Cheers,
Alex.
Bump for $45, down from $150.