Hi All,
I am after a 3 litre Alfa 75 flywheel, anyone have one lying around or know where I can get one?
thanks,
Marino
Can I ask why?
Looking to put a 156 GTA motor in my 1985 gtv6 and my research tells me I need a 3.0Litre flywheel to ensure proper engine balance.
If anyone can verify would be great.
Hi Marino,
I have a spare flywheel for an Alfa 75 Twin Spark... not sure if that is significantly different to a 3 litre, and if it would be of use to you.
Regards,
Nick
Quote from: marinoci on May 24, 2012, 11:25:53 AM
Looking to put a 156 GTA motor in my 1985 gtv6 and my research tells me I need a 3.0Litre flywheel to ensure proper engine balance.
If anyone can verify would be great.
OK - hence why I asked. On a 3 litre 164 engine you can use your 2.5 GTV6 flywheel with a 4mm spacer between the crank and the flywheel. Not sure but I believe the 3.2 engine is the same - Hugh Harrison at Monza Motors (site sponsor) has done at least one 3.2 to GTV6 conversion so give him a call to verify.
What you do then is get the 2.5 flywheel and front pulley balanced to match the ones that come off the 3.2 engine. Voila - balanced bottom end. Just like J-Lo ;)
Great Feedback, thanks Aggie57,
I will get in touch with Hugh and share any info I can.