Alfa Romeo Owners Club of Australia Forum

General Category => Buy/Swap/Sell [Announce ONLY] => Topic started by: Fylnn on March 12, 2012, 04:17:58 PM

Title: WTB Distributor for GTV6 2.5 litre
Post by: Fylnn on March 12, 2012, 04:17:58 PM
I am interested in getting a spare distributor for my GTV6.  Reason being that it has a Haltech on it, and every so often under load on hot days and rough roads (it is a rally car) it cuts out.  Could be a myriad of things but one potential source is the ignition trigger in the distributor.  The connections are a little loose and dodgy besides.

So if I had a spare distributor I could get it rebuilt with like a Nissan ignition trigger or something.  The guy who installed the Haltech is understandably reluctant to touch the old one if it is the only one I have.

So anyone got anything lying around?  I am in Brisbane but can arrange shipping if need be. 
Title: Re: WTB Distributor for GTV6 2.5 litre
Post by: dehne on March 12, 2012, 04:43:27 PM
I have one make me an offer, i am in vic so say add aproxx $10 for postage
thanks dehne
Title: Re: WTB Distributor for GTV6 2.5 litre
Post by: Fylnn on March 12, 2012, 09:13:34 PM
PM sent
Title: Re: WTB Distributor for GTV6 2.5 litre
Post by: dehne on March 12, 2012, 10:37:46 PM
just thinking, hopefully someone can confirm, that there is a difference between the leaded and unleaded with their distributors, I think I recall a difference with them and I think it was to do with a wire that attatched to it,

so flynn can you stick a pic up just so that I know the spare I have is right for you.

Title: Re: WTB Distributor for GTV6 2.5 litre
Post by: Fylnn on March 13, 2012, 09:55:17 AM
OK will do when I get car back later in the week.  It will be rebuilt anyway so wire connection won't probably matter.