OK, I'm after a 12 Valve V6 distributor blank/oil pump drive retainer bearing and shaft that are used when the distributor is either mounted at the back of the 164 V6 engines or when going distributor-less ignition system.
If anyone has 1 or can make 1, please let me know.
If anyone can recommend a well priced supplier/producer, please let me know.
Duk,
Did you find a source for your blanking plug? Don't know if it will help, but saw this site, suspect they may just be for Fords:
http://trigger-wheels.com/store/
I also remember something about some people modifying or cutting down a distributor to basically leave the gear on a shaft in-situ. Not as neat as what you're after though.
Regards, AL.