Alfa Romeo Owners Club of Australia Forum

General Category => Buy/Swap/Sell [Announce ONLY] => Topic started by: BradGTV on June 13, 2011, 07:13:51 PM

Title: FS: v4 Simmons wheels
Post by: BradGTV on June 13, 2011, 07:13:51 PM
up for sale is a set of x4 simmons v4 3 peice wheels 15" x 7" wide.
the they are to suit 4x98 pcd alfas, that is alfetta, gtv, giulietta, sud, sprint and 33.
the wheels have been repainted in 2 pac grey, new zinc plated socket head bots, new nyloc nuts and a repolished rim.
comes with x4 centre caps and a set of chrome wheel nuts to suit the wheels and alfa studs.
these are great wheels, are very light, look fantastic, and are very good quality wheels, would suit a full race car, track car or give nice period style to a daily driver.
located in adelaide, but will post, maximum (maybe less if closer) postage is $25 within australia
asking $850
(sorry for poor quality pictures, only had my phone to take them, will post up some more next weekend of them in full daylight and with a proper camera)
cheers, Brad
Title: Re: FS: v4 Simmons wheels
Post by: Darryl on June 13, 2011, 08:32:05 PM
What is the offset?
Title: Re: FS: v4 Simmons wheels
Post by: BradGTV on June 13, 2011, 08:46:21 PM
hi darryl,
im not sure of the offset or how to measure it.
i will however do some reaserch and find out. then get the mesurments asap,
but they do fit my gtv perfectly, no clearence issues.
cheers, brad
Title: Re: FS: v4 Simmons wheels
Post by: scott.venables on June 13, 2011, 10:44:49 PM
To get the offset, measure the distance from the back face of the wheel to the mounting face(back spacing) and minus from that half the overall wheel width.

or

Back Spacing - (overall wheel width / 2)

Scott

Title: Re: FS: v4 Simmons wheels
Post by: norman gen on June 14, 2011, 05:51:58 AM
It's possible the offset is stamped on the  back of the wheel centre or the rim somwhere - a 2 digit no. followed by or preceding with the letters ET...eg. ET40
Title: Re: FS: v4 Simmons wheels
Post by: lfetta on June 14, 2011, 07:38:32 PM
Are the wheels all in good condition?
Title: Re: FS: v4 Simmons wheels
Post by: nick on October 06, 2011, 07:14:07 PM
Hi Brad I was wondering if the rims are still for sale