Print Page - Wanted.... Scrap/ poor cond v6 non catalytic secondaries/engine pipes

Title: Wanted.... Scrap/ poor cond v6 non catalytic secondaries/engine pipes
Post by: david sammartino on April 08, 2011, 05:12:27 PM

Hi there, i am currently making a set of secondary engine pipes for my 75 3.0 v6 and i am in need of 2 flanges, hence why they can be scrap, or if even better somone can cut them off and send them to me. Maybe if someone has recently wrecked a 90, or gtv6 with non cat converter???? Obviously im not going to pay alot, but it would help me out as i dont have the time in getting a set cut atm.
Please pm or email dsammartino1@hotmail.com.
Cheers

Title: Re: Wanted.... Scrap/ poor cond v6 non catalytic secondaries/engine pipes
Post by: dehne on April 08, 2011, 05:48:13 PM

little confused here, is it the part where the exhaust joins the manafold, or is it the gaskets for that

Title: Re: Wanted.... Scrap/ poor cond v6 non catalytic secondaries/engine pipes
Post by: david sammartino on April 09, 2011, 01:48:51 AM

The flanges that bolt onto the factory cast iron extractors. Simply, the two long pipes that join into the centre muffler, i need the two flanges that are used to bolt on these two pipes onto the extractor.One on from each side. Hope thats abit clearer lol

Title: Re: Wanted.... Scrap/ poor cond v6 non catalytic secondaries/engine pipes
Post by: john m on April 10, 2011, 03:35:07 PM

David, you might find what your looking for here...

http://www.bestmufflers.com/bshop/index.php?cPath=323_324&osCsid=470177ae9f76a480dc68c23559cbeee9

Will save you time and effort.

Alfa Romeo Owners Club of Australia Forum

General Category => Buy/Swap/Sell [Announce ONLY] => Topic started by: david sammartino on April 08, 2011, 05:12:27 PM