Looking for a 2 litre Engine Head in very good condition, no cracks or soft spots. Will take a whole engine if necessary. I need it for a race engine.Thanks. Glenn
Glenn
I have both items available. Motor is a recently refurbished 2 litre (116 Series) with 10548 cams.
Barry
Glenn, not sure if you know, but a good check is measuring the depth from base of plug to head face...I 'think' from memory about 113mm is a good thickness, but best to check that with Vin at Pace...you can get your head done there while you are at it, fantastic to deal with.
Hmm, just for prosperity, I see that I noted head depth from plug seat to face of head when it should have been head stud mounting face to head face...that would be 113 on a good head.....sorry!
Yes...I know this is an old thread but while searching for info it came up in the search.