Hi all,
I have finished a few more jobs on the "to do list" for my 105, one of which was modifying the old european number plate holder. I was never a fan of the large plate holder so I decided to cut up the plastic part of the holder and use the curved sections as a plate holder. The advantages of this, apart from looking neater, is the plate holders are only held by a single stainless long thin bolt and the bolt hole is now in a much easier place to get at. I welded up the origional bolt holes and also got the rear bumper straightened and polished.
I have also had fun replacing both engine mounts ( not as bad as I thought it would be) and fitted my new stainless exhaust system that I got from Classic Alfa (the good exchange rate helps).
While I was under the car I decided to fix the leaking pinion oil seal on the diff ( made up my own tool using a cheap $10 socket) and retorqued the head. So far the pinion seal does not leak and the head is not leaking oil...I will keep my fingers crossed.
I still have a kind of humming sound coming from some where under the car at low speeds, I think it may be the diff, only noticeable when cruising in low gear or coasting in neutral.....anyone had the same?
Regards
Tim