Hi Guys,
I want to know if I can replace this fitting with a bung on a 24V V6:
(http://i48.photobucket.com/albums/f249/smity42/Random/coolantfittings.jpg)
It is the heating for the heater hose. I won't have a heater box, so I need to either bung up that hole, or run a hose from there to the bottom radiator hose. I would rather bung it up as it is neater and simpler, but I don't want to do it if it will prevent the cooling system from working properly (i.e. stop anything cooled by that gallery getting coolant flow past it).
What do you reckon?