Alfa Romeo Owners Club of Australia Forum

Technical => 105/115 Series (105 Coupe/Spider/Berlina) => Topic started by: Michael B on March 22, 2010, 02:46:12 PM

Title: 105 1750 shell on casters for sale
Post by: Michael B on March 22, 2010, 02:46:12 PM
I have a 105 1750 shell on casters for sale.  It has both doors, bonet, bootlid no interior or suspension.  All in undercoat grey with some surface powder rust on exterior.  I sold it twice last year on e-bay with no one paying or picking it up!!!!  Most people who contacted me were concerned about the complications of shipping of the unit interstate.  It has been in storage in this condition for over 5 years and an inspection on the weekend has shown some surface powder(rust) starting to settle on it.  It is located in Ballarat, Vic.  I was intending to make a track car out of it but those plans have now changed.  It is too good to drop off to scrap but it does need a little more work before painting.  I will accept offers over $500.00 if anyone is interested.
Title: Re: 105 1750 shell on casters for sale
Post by: Davidm1600 on March 22, 2010, 04:28:44 PM
Hi Michael, I know a guy who posts on the BB and possibly here who maybe after what you have, as has plans to make a GTAM clone using a 1750 shell.  I am not sure where he is located but I think in Victoria, so who knows it could work out ok.  His name is Peter.

If you wish to PM me your contact details I can pass them onto him.  Cheers Dave
Title: Re: 105 1750 shell on casters for sale
Post by: Michael B on March 22, 2010, 04:50:45 PM
Thank you for your help.....I forgot to include a few important details....as in I can forward photos via e-mail if required....(I am still learning how to navigate around this forum).......and my mobile no is 0402310366.   The usual conditions apply...first in best dressed.

Cheers,   Michael B.
Title: Re: 105 1750 shell on casters for sale
Post by: Davidm1600 on March 22, 2010, 07:25:01 PM
Hi Michael, thanks for the contact details and yes I know what you mean re learning how to use the forum.  I have posted a message to Peter, I will check back to see if he has responded and can forward your details on to him.  Naturally of course, first in best dressed.  Hopefully what ever happens it will work out well for all.  Cheers Dave
Title: Re: 105 1750 shell on casters for sale
Post by: carbon on March 24, 2010, 12:42:18 AM
Hi Michael,
I've been given your details from Dave <Super1600> in Hobart through the AlfaBB site from my Alfa 1969 1750 GT Veloce wanted post in the Australian Forum section, as I understand you have a 1750 for sale.
As I understand from the post it's only a shell, so does this mean it is bare, or is there any chrome mouldings, windscreens and glass, lights, bumpers, grille, etc, or anything else with the car ?
Also, does it have the original compliance plates still attatched ?
Do you know its history, including owners and accident / body damage repaired and needing repair ?
The extent of the rust - more than surface rust ?
What have you had done to the car ?
Can you contact me on 0433 297 869 so I can get some more info regarding the car if I can't get through to you first ?
Best Regards, Peter.
Title: Re: 105 1750 shell on casters for sale
Post by: Michael B on March 24, 2010, 04:35:55 PM
Hi guys...I have received a deposit on the shell.  It is considered as sold...if the sale falls through I will repost my message.

Thank you all for your interest and polite manner.

Yours


Michael.