Alfa Romeo Owners Club of Australia Forum

General Category => Buy/Swap/Sell [Announce ONLY] => Topic started by: Guy on March 16, 2010, 11:48:44 AM

Title: Wanted: Alfasud Bilstein/koni front shocks
Post by: Guy on March 16, 2010, 11:48:44 AM
Howdy, im looking for some aftermarket shocks for the front of my rally car, as i cant seem to find anyone who sells new ones, im wondering if anyone out there has some second hand bilsteins or konis?

thanks Guy
Title: Re: Wanted: Alfasud Bilstein/koni front shocks
Post by: Storm_X on March 16, 2010, 07:17:54 PM
i have a pair of front konis reds how much would you offer??
i am in no need to sell them as i can use them in the future
Title: Re: Wanted: Alfasud Bilstein/koni front shocks
Post by: Guy on March 19, 2010, 09:35:46 AM
Hey they are for an ALFASUD arent they?
Title: Re: Wanted: Alfasud Bilstein/koni front shocks
Post by: Storm_X on March 19, 2010, 02:22:53 PM
alfetta they came off. but will fit 116.
Title: Re: Wanted: Alfasud Bilstein/koni front shocks
Post by: Guy on March 19, 2010, 02:58:33 PM
ok, well im not an alfa expert, so what is a 116?

Sorry, Thanks
Title: Re: Wanted: Alfasud Bilstein/koni front shocks
Post by: Anthony Miller on March 19, 2010, 05:57:49 PM
  Suds are 900 series and FWD, polar opposite to 116 RWD, these are not the shocks you are looking for. Try Vin Sharp at Pace or any of the club sponsors
Title: Re: Wanted: Alfasud Bilstein/koni front shocks
Post by: Guy on March 19, 2010, 09:52:27 PM
Thanks, would you have any contact details for Vin?
thanks again, Guy

Title: Re: Wanted: Alfasud Bilstein/koni front shocks
Post by: scuzzyGTV on March 22, 2010, 02:09:49 PM
Vin @ Pace (03) 9844 0147
Title: Re: Wanted: Alfasud Bilstein/koni front shocks
Post by: Guy on March 23, 2010, 10:51:38 AM
thanks
Title: Re: Wanted: Alfasud Bilstein/koni front shocks
Post by: philpot on March 24, 2010, 05:55:07 PM
Hi Guy, have front struts on my '81 sud ti that have been modified to take the re-buildable, Koni cartridge inserts. Were last rebuilt by Top Performance in Vermont (with sports valving) 'bout 5 years/30 000k's ago. Rebound has been adjusted up three half turns (of available 5 by memory) by Benincas specs. Bottom of strut mount holes (4) have been slotted slightly to allow reduced neg. camber. Do you still need them?   Whats the Offer? ;)   (PM RSVP...)
Phil
Title: Re: Wanted: Alfasud Bilstein/koni front shocks
Post by: Southern75 on April 09, 2010, 08:57:20 PM
Vin Sharpe is not a sud man ... ring around you may have to get something from the UK or koni direct