Well..... as my car does not have one, and every lining i have ever seen is ripped and falling apart, I just ordered one of these....
http://cgi.ebay.com/ebaymotors/Alfa-Romeo-GTV6-Hood-Pad-Heat-Shield-With-Alfa-Logo_W0QQitemZ290317848364QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item43984acf2c&_trksid=p4506.c0.m245&_trkparms=72%3A1171%7C65%3A12%7C39%3A1%7C240%3A1318#ht_1759wt_1360
Hopefully it is all good and i will post pics when it is installed!
Nice one Simon, I would be very interested in seeing your photos when finished.
Alan
Pics when you're done!
Before and After...
Overall it is an ok fit but looks better than before!
Very Nice Simon, looks good from here.
AL.
Nice one simmo! I'll have to find time to go for a spin an see all that fancy new stuff you've put into the car!
Simon,
Do you know if they do a 4 Cylinder version. Couldn't seem to find anything on their website
Hi Paul,
They say it will fit all GTV models, and it should.. the bonnets only differ in the exterior i believe - underneath is still the same shape.
Simon,
Look great.
Did the bonnet liner come with the clips or did you have to source those yourself?
You didn't go with the Alfa emblem on the material?
The liner doesn't come with those clips - half of those are x-mas tree clips from Bursons and some are original Alfa ones....the Alfa ones are quite brittle but they are just there while Bursons order some more of their own in. Unfortunately the clips alone won't hold the lining in place - it sags too much so some adhesive was required.
No alfa emblem as that plastic cover will probably have to come off one day meaning the lining will probably have to be cut... plus the emblem could only be stuck to the smooth side and the ruff side looks much nicer and more original!