Hi all,
I'm replacing the front springs on my 1972 1600 Junior with some from Alfaholics and find that the spring pans and spacers are so badly corroded that I can't tell whether the original spacers are the 7mm or 10mm versions.
Any advice on what they are likely to be? / should be?
Hi Rex
Just fit the new springs without the Spacers and evaluate.
Evaluate means,,which side is lower than the other.
If one side is 7 or 10 mm lower,,add the shim to that side.
Beautifully simple and logical answer! :)
Thankyou!