See pics.. I cant remember where it fits in and cant find where the 2 bolts attached to an edge on it match up....
Somewhere between the bulkhead and the rear exhaust manifold
advice please! cant find a diagram on elearn..
worked it, bolts onto the sub frame.
Dim recollection says there is a heatshield between the manifold and the engine block (to shield the starter motor), think its attached to the engine via a bracket near the gearbox end of the head. Or its attached to the heatshield that goes between the manifold and the firewall, or could even be attached to both. It's been a few years... I do remember there being something awkward about the way the heat shielding on that rear manifold goes together.
Simply bolts on in front of rear engine mount on the subframe by bolts and goes back over the steering box/rack. Its to protect the steering unit from heat.
Baz
just need to find where the nuts went : )