Hi Guys
Ive misplaced my Elearn CD for the V6....
Can someone tell me what the torque setting is for the bolt attaching the auxiliary belt tensioner to the side of the engine.
Im just replacing the pulley on the tensioner, so the torque for the pulley wheel bolt also.
thanks
update!
Was thinking of using the sump plug or spark plug torque but then noticed on a ngk web site that as the diameter comes down so does the torque...(see table below) So whats ok for a large diameter in an Aluminium alloy hole may strip out a smaller bolt hole in the same metal. So much so that a 10mm dia plug is only torqued to 10Nm... The length of the bolt; how many threads are engaging would come into play too, not just diameter.
wonder if i over tightened the bolt retaining the timing belt tensioner....
Swapped out ok. Word of caution when unbolting the pulley wheel off the tensioner. Its a left hand thread.
Hello CC, fellow Brisbane alfisti! Not sure which bits you mean so here is a cut n paste of the whole page :)
BELT PROTECTION COVER
Bolt
M6
0.9
1.9 JTD 8V
COOLANT PUMP
Bolt
M6
(Engine crankcase side) 0.8 ÷ 1.0
3.2 V6
FIXED TENSIONER
Bolt
M8
2.3 ÷ 2.8
1.6 TS
2.0 TS
FIXED TENSIONER
Bolt
M10
4.5 ÷ 5.5
1.9 JTD 16V
FIXED TENSIONER
Bolt
M10
(Cylinder head side) 4.5 ÷ 5.5
3.2 V6
FIXED TENSIONER
Bolt
M8
2.1 - 2.6
1.9 JTD 8V
MOBILE TIMING TENSIONER
Nut
M8
2.3 ÷ 2.8
1.6 TS
2.0 TS
MOBILE TIMING TENSIONER
Nut
M8
2.3 ÷ 2.8
1.9 JTD 16V
MOBILE TIMING TENSIONER
Nut
M10
4.2 ÷ 5.2
1.9 JTD 16V
1.9 JTD 8V
MOBILE TIMING TENSIONER
Bolt
M8
(Cylinder head side) 1.9 ÷ 2.3
3.2 V6
MOBILE TIMING TENSIONER
Nut
M8
2.5
1.9 JTD 8V
MOBILE TIMING TENSIONER
Nut
M10
(Cylinder head side) 4.2 - 5.2
1.9 JTD 8V
MOBILE TIMING TENSIONER
Nut
M10
4.3 ÷ 5.3
1.9 JTD 8V
TIMING DUCT PULLEY
Bolt
M12
(Cylinder head side) 10.8 - 13.2
1.9 JTD 8V
TIMING DUCT PULLEY
Bolt
M12
10.2 ÷ 12.6
1.9 JTD 8V
TIMING DUCT PULLEY
Bolt
M12
10.8 - 13.2
1.9 JTD 8V
TIMING GEAR DRIVEN PULLEYS
Bolt
M12
(Camshaft side) 10.8 ÷ 13.2
1.6 TS
TIMING GEAR DRIVEN PULLEYS
Bolt
M6
(Inlet camshaft side) 0.8 ÷ 1.0
1.6 TS
2.0 TS
TIMING GEAR DRIVEN PULLEYS
Bolt
M12
(Exhaust camshaft side) 10.8÷13.2
1.9 JTD 16V
2.0 TS
TIMING GEAR DRIVEN PULLEYS
Bolt
M12
(Camshaft side) 7.2 ÷ 8.8
3.2 V6
TIMING GEAR DRIVEN PULLEYS
Bolt
M12
10.2 - 12.6
1.9 JTD 8V
TOOTHED DRIVE PULLEY
Bolt with left hand thread
M16
(Crankshaft side) 20.9 ÷ 23.1
1.6 TS
2.0 TS
TOOTHED DRIVE PULLEY
Bolt with left hand thread
M12
323 357
1.9 JTD 16V
TOOTHED DRIVE PULLEY
Bolt with left hand thread
M16
(Crankshaft side) 30.6 - 37.8
1.9 JTD 8V
TOOTHED DRIVE PULLEY
Bolt with left hand thread
M16
32.3 - 35.7
1.9 JTD 8V
TOOTHED DRIVE PULLEY
Bolt with left hand thread
M16
34
1.9 JTD 8V
cheers