Print Page - Head gasket for 2.0 Alfetta coupe

Title: Head gasket for 2.0 Alfetta coupe
Post by: FL510 on April 01, 2016, 01:02:04 PM

Hi Just wanted know if the cylinder bore spacing for the Alfetta 2.0 "nord" engine ever changed during production?

The reason I ask is that the head gasket I wanted to use from Italy had cylinders 1 and 4 offset enough to make it unusable so I ended up using a Victor Reinz gasket instead.

The engine number is AR01623 so should be correct for a '77 Alfetta Gtv?

Appreciate any additional info, trying to determine if I was sent the wrong gasket or maybe a gasket production fault for replacement/refund.

Thanks again

Sent from my iPhone using Tapatalk

Title: Re: Head gasket for 2.0 Alfetta coupe
Post by: FL510 on April 01, 2016, 08:47:49 PM

All sorted, production fault with replacement on the way !

Sent from my iPhone using Tapatalk

Title: Re: Head gasket for 2.0 Alfetta coupe
Post by: aggie57 on April 02, 2016, 03:33:23 AM

Good it sorted but yes, all production type 2-litre 105/116 engines have the same bore centres.

Title: Re: Head gasket for 2.0 Alfetta coupe
Post by: FL510 on April 02, 2016, 11:39:24 AM

Thanks !

Sent from my iPhone using Tapatalk

Alfa Romeo Owners Club of Australia Forum

Technical => 116 Series (Alfetta Sedan/GT/GTV & Giulietta Sedan) => Topic started by: FL510 on April 01, 2016, 01:02:04 PM