Does anyone out there (preferably in Qld) have a set of 15 inch rims with a 4 x 98pcd stud pattern that they are willing to part with for something less than a king's ransom? The internal diameter of the rim also needs to be as close to a minimum of 370mm as possible. I know I am pushing the friendship now, but I am going to use them as race rims so the lighter they are the better.
Thanks folks,
Brent
Hi,
I've just joined the website and noticed your request for some rims. Are you still looking ? If so, I have 4x 15" wire type wheels that were on a 105 (which i think has a 98PCD). I'm in SA.
Adrian
Sorry to dissapoint you but 105 wheels are not 4x98 so wont fit.
Thanks guys. I ended up grabbing a set from Newcastle.
Cheers,
Brent
Hi Hammer, if you need a spare set of 15x6.5 lightweight alloys , I have them sitting in my garage with worn yoko 32rs. I used to use them for supersprints on my Alfetta GT. They are Velox Star pattern alloys, they can clear V6 brakes( woops did I say that) and are the 4x98pcd in perfect condition for $400
Cheers Hollywood
Hollywood,
Thanks very much for the offer. I am actually using the spacers that Jim Nielsen had made for the Guilietta, that convert the PCD from 4X 98 to 4 x 114.3. So believe it or not I am currently running a set of 15 x 7 wheels that I bought from a young drift racer that he used to run on a Toyota.
Thanks again for the offer and congrats on your efforts at the East Coast Challenge. Hope to see you at Lakeside next year for round three.
Cheers,
Brent