Hi all,
I have a set of 4 steel wheels I believe are original 105 2l ones.
Photo of one attached .
The Bridgestones on them are in v/good nick and are 205/65/15.
Centre caps not included.
$400 the lot or would look at a straight swap for 5 Alfetta gt steel wheels(14s).
Alfetta PCD is 98 mm, 105 is 108 mm.
Standard steel wheels for a GT have round holes, as per the ones pictured. You have the standard wheels with 15" rims on them... not an unusual modification. I once had a Berlina witha similar mod.
Alloy turbinas were optional, worth next to nothing. I gave away a set of five a few weeks ago.
Do you think these would fit an early stepnose 105 without requiring any modification?
Hi LukeC,
thanks for the info.That clarifies it for me.
Yes I did see that they'd been mod. , but wasn't aware they were off a possible 116 .
Not quite what I need for mine but will still look at selling on the appropriate page.
Thanks again.
Wheels sold ......
Can you confirm that they were actually 105 wheel centres, or 115? Just curious now, but I've been wanting 15" wheels on my 105.
Hi CJ,
yes my initial oversight due to lack of knowledge!
They are 15 inch wheels with a 98 mm pattern, not suitable for 105 pattern.
They look terrific in filling the arches and the extra width is a bonus.