1980 GTV, how is the headrest released from the seat back ?
Many thanks
Some headrests are held in with a hitch pin, and you have to slide it off at the base of the stalk of the headrest, others, you just grasp the headrest and give it a firm lift up, Colin.
All done: The head of two round-head screws prevent the headrest from disengaging, flexed the metal to widen the gap of the slot and out came the headrest.
Next, where can new seat springs be purchased ?
Try a motor trimmer and or trimmer that does cars, boats, bikes and household furniture.
Or you could do what i have done in the past, put some heavy cable ties in, to hold the springs more firmly together, Colin.
I'll start by cutting the springs shorter one-half loop