Text only | Text with Images

Alfa Romeo Owners Club of Australia Forum

Technical => 116 Series (Alfetta Sedan/GT/GTV & Giulietta Sedan) => Topic started by: ALFAAA on May 21, 2014, 05:19:59 AM

Title: Fitting 2.5LT heads to a 3.0LT v6
Post by: ALFAAA on May 21, 2014, 05:19:59 AM
Hi ,
Has anyone tried to fit 2.5 litres heads to a 3.0 litre engine.( Single overhead cam engines) ::)
Title: Re: Fitting 2.5LT heads to a 3.0LT v6
Post by: Mick A on May 21, 2014, 10:11:42 PM
why would you?
Title: Re: Fitting 2.5LT heads to a 3.0LT v6
Post by: ALFAAA on May 22, 2014, 05:06:55 AM
Hi Choderboy,
I have a new set of 2.5 LT heads (no valves)sitting under my garage bench for years and I have 3 lt engine .I was going to keep them for spares but if the clearance volumes are no good or the valves are smaller I will end up selling them. :(
Title: Re: Fitting 2.5LT heads to a 3.0LT v6
Post by: LaStregaNera on May 22, 2014, 10:35:03 AM
Ports are smaller, valves are smaller, combustion chamber is smaller bore to match the 2.5...
Title: Re: Fitting 2.5LT heads to a 3.0LT v6
Post by: ALFAAA on May 22, 2014, 07:15:40 PM
Oh Well, it looks like its time to sell them :-\
Text only | Text with Images