My car has pods and socks on the carbies. Most of what I've read says the factory filter is better so I'm putting that back on. There is a bracket that holds the airbox to the carbies - anybody know what bolts are required? There is a bodgey setup at the moment (which has failed) and led to cracked inlet manifolds (have already sourced some new ones). Cheers.
Think they are 5 mm, with a 10mm hex.
No guarantee, only thinking from memory, haven't actually got a standard GTV.
They are M6 that takes a 10mm spanner,don't forget some shake proof washers or loctite on them to make sure they can not come undone and go into the Carbs!.
Cheers
Andrew
Cheers guys!