Noticed a noise yesterday while parking the GTV everytime I used the clutch >:(.
This morning determined it was coming from the clutch slave cylinder, a squeaky noise like rubbing a finger over wet glass; the cylinder was replaced 2 years ago, let's hope for the best :-\.
Not familiar with Alfetta slave cylinders, but when the slave cylinder gets noisy on my 33, i put a dab of zinc grease on the ball of the pushrod where it pushes the fork, Colin.
That's what I would suggest, but it could also be where the push rod sits in the slave or where the fork pivots on the ball in the transmission.
Scott
Colin & Scott, you have set my agenda for the afternoon :), will let you know the outcome ;), thanks for the assistance.