As the add says, looking for one or two alxes to suits Alfa 75 twinspark box. Not sure if GTV6 axles are the same?
Cheers
Mike
0488091723 (I am in WA so unless you are too, it would be great if you could ship).
UPDATED - phone number was missing a 7!!
I assume these can not be purchased new from anywhere....
No one has a set that they want to sell?
Can anyone comment on whether Alfa 75 3ltr cv's will bolt up to twinspark stub axles? I at least have a set of these.
GTV6 cv 10mm bolts are on a 93.5mm pcd
Alfetta GTV cv's have a 80mm pcd. The diff hub on an Alfa 75 twinspark diff uses an 8mm bolt on 80mm pcd. Late model afetta GTV's have as far as I can tell, a 8mm diff axle hub, with associated disks that have 9mm through hole. Earlier types seem to have a 10mm hole in the hub and disk, and have a spacerbetween the cv and disk, repsumably to account for the fact that the pre 5 wheel stud cars with the smaller cv's have 8mm holes on 80mm pcd.
The long and the short of it is I still need a pair of cv's attached to a good, long Alfetta shaft (ie non spacer type) to suit 4stud cars. Anyone? Must be heads of these lying around gathering dust!