Text only | Text with Images

Alfa Romeo Owners Club of Australia Forum

Technical => 160 Series (90, 75, 164 Sedans) => Topic started by: GTVeloce on February 14, 2013, 03:54:14 PM

Title: Lower bush for gear lever
Post by: GTVeloce on February 14, 2013, 03:54:14 PM
Does anyone know which bush fits the lower part of a 75 gear lever? Also, where to get it from? Mine has too much play for my liking.

Thanks
Title: Re: Lower bush for gear lever
Post by: four90s on February 14, 2013, 04:13:17 PM
The Spare Place in Adelaide has them.

Quite cheap as well. Can't remember how much.

Steve
Adelaide
Title: Re: Lower bush for gear lever
Post by: GTVeloce on February 27, 2013, 03:47:49 PM
Thanks Steve. Tried them but they have run out. They still have Alfetta ones but that is no good for me. Still I bought something else from them and they were very quick to post it out.
Cheers
Title: Re: Lower bush for gear lever
Post by: 1969read on February 27, 2013, 09:04:28 PM
a guy in the uk alfa 75 site had some stuff also an alfa performance store was selling a monkey kit,l ordered one but took 5 or 6 months to arrive jason
Title: Re: Lower bush for gear lever
Post by: GTVeloce on March 07, 2013, 09:49:19 PM
Some new developments. I had a good look at the bottom of the gear lever tonight and the lower bushing just pushed out easily by hand!

On top of that I discovered the roll pin that holds the gear selector rod to the linkages is missing and someone has put wire through the hole!

So, tomorrow I will be sourcing a new roll pin (bunnings?) and also need a new bushing. Any local sources that might have one? I'll take a photo tomorrow and post it up as well.

Thanks
Text only | Text with Images