3.0L Rebuild

Started by Simon Aarons, April 13, 2011, 09:21:43 PM

Previous topic - Next topic

Simon Aarons

Just thought i'd share a few photos from the recent rebuild. Big thanks to the guys down at Monza Motors!
1986 GTV6 3.0L

Simon Aarons

More...
1986 GTV6 3.0L

Simon Aarons

More!
1986 GTV6 3.0L

Simon Aarons

Proudly built by a Gumby  ;)
1986 GTV6 3.0L

Sheldon McIntosh

Thanks for sharing man, those are great photos.

Is it a 3 litre from a 75 or a 164?

aggie57

Nice job Simon - isnt it amazing how many parts go into an engine!
Alister
14 Alfa's since 1977. 
Currently 1973 GTV 2000, 2020 911 C2S MT, 2021 Mercedes GLE350, 2023 Polestar 2 LRDM
Gone......far too many to list

Simon Aarons

Thanks guys.. Sheldon the engine was from a 164, but as you would know all the bolt on's are from the original 2.5L.

The engine was put in about 2 years ago but after a couple track days (very fun track days) it seemed to develop a bit of an oil addiction.. it seemed to like oil more than petrol! Then waste it all out of the exhaust, but it left a lovely blue cloud everywhere i went :)
1986 GTV6 3.0L