156 Selespeed pump

[davidald4949]

Does anyone have a guide or link on the best way to replace the selespeed pump? Thanks

[dehne]

Are you talking about pump in left front

[bazzbazz]

Easiest way is to -

1/ Disconnect Selespeed pump Electrical Connector the night before, this will allow the system to fully depressurise, otherwise you will get an eye full of Selespeed fluid at several PSI when you disconnect any line.

2/ Remove LH Front wheel

3/ Remove LH Front Guard liner

4/ Drop the LH side of the bumper, just enough to take out the headlight.

5/ Drain as much fluid from the reservoir as possible.

You now have full access to all the bolts and fittings to remove the pump. Just don't reconnect the pump till you are ready to refill the fluid.

[davidald4949]

Thanks for the replies. Yes top left. I will proceed with confidence Bazz  thank you.