Author Topic: Dyno Day June 2nd  (Read 10441 times)

0 Members and 1 Guest are viewing this topic.

Domenic

  • Full Member
  • ***
  • Posts: 197
Dyno Day June 2nd
« on: May 26, 2007, 05:45:26 PM »
Hi

Just wondering if the Dyno Day is still happening at Beninca motors on the 2nd of June?

If so how much is it to run my car and what will the schedule be like? Start time, BBQ????

 
Thanks
Domenic

alfagtv58

  • Hero Member
  • *****
  • Posts: 1519
    • www.alfagtv.com.au
  • AROCA Member #: 3396
Re: Dyno Day June 2nd
« Reply #1 on: May 28, 2007, 08:40:53 AM »
Hi Domenic,

I have been attempting to get something on the website, without much luck!

Dyno Day.
 
We will be having a Dyno day at Beninca’s on Saturday 2nd June.  Cost will be $40.00 for a power run with a reading of air/fuel mix and a check for accuracy of both your speedo and tacho.  The BBQ will be fired up, and there will be a snag in bread on offer so there is no need to head down to Bunning’s and buy one there!  The address is 581 Canterbury Rd Surrey Hills and we should be kicking off at around 11am.  The plan is to try to group the front wheel drive cars together and the rear wheel drive cars together and finally any 4WD cars (all Brera’s and V6 159’s welcomed!).  It’s a good social day, and bragging rights will stand until the next time we do another Dyno day!  See you there.

1967 Giulia Sprint GT Veloce - (WIP) Strada
1977 Alfetta GTV Group S - Corsa - For Sale (http://www.alfaclubvic.org.au/forum/index.php/topic,9600.0.html)
2009 159 JTS Ti

alfagtv58

  • Hero Member
  • *****
  • Posts: 1519
    • www.alfagtv.com.au
  • AROCA Member #: 3396
Re: Dyno Day June 2nd
« Reply #2 on: May 29, 2007, 09:37:28 AM »
**BUMP**

This Saturday folks!
1967 Giulia Sprint GT Veloce - (WIP) Strada
1977 Alfetta GTV Group S - Corsa - For Sale (http://www.alfaclubvic.org.au/forum/index.php/topic,9600.0.html)
2009 159 JTS Ti

Weapon147

  • Newbie
  • *
  • Posts: 3
Re: Dyno Day June 2nd
« Reply #3 on: May 29, 2007, 03:47:12 PM »
Hey guys just bought a used alfa 147 2004.... havent joined up to the club yet but am i still welcome to come down for dyno day on the 2nd of june?????

alfagtv58

  • Hero Member
  • *****
  • Posts: 1519
    • www.alfagtv.com.au
  • AROCA Member #: 3396
Re: Dyno Day June 2nd
« Reply #4 on: May 29, 2007, 04:31:11 PM »
Sure, if you want you could even fill out the membership form and give it to me on the day ;D
1967 Giulia Sprint GT Veloce - (WIP) Strada
1977 Alfetta GTV Group S - Corsa - For Sale (http://www.alfaclubvic.org.au/forum/index.php/topic,9600.0.html)
2009 159 JTS Ti

Weapon147

  • Newbie
  • *
  • Posts: 3
Re: Dyno Day June 2nd
« Reply #5 on: May 29, 2007, 04:37:45 PM »
Yeah sounds good man... most likely see you on sat!  ;D ciao

Brad M

  • Administrator
  • Hero Member
  • *****
  • Posts: 769
  • AROCA Member #: [Vic]490A
Re: Dyno Day June 2nd
« Reply #6 on: May 31, 2007, 09:06:45 PM »
Phil / Domenic,

What time will the dyno runs finish? I ask because I'm keen but can't make it before 1:30 or 2.

Cheers, Brad
06 147 JTD 1.9
76 116 GT 2.0
72 105 GTV 2.0

Gone... 2x 147 GTA, 2x 90, 2x SudSprint

Next? ... http://www.alfaclubvic.org.au/forum/index.php?topic=17067

alfagtv58

  • Hero Member
  • *****
  • Posts: 1519
    • www.alfagtv.com.au
  • AROCA Member #: 3396
Re: Dyno Day June 2nd
« Reply #7 on: June 01, 2007, 08:50:41 AM »
Hey Brad,

It depends on the turn up, but I would imagine that 1.30 - 2.00 wont be a problem.  If you want, give me a call before you leave and I will let you know how we are going for time.

My number is 0408 573 596.
1967 Giulia Sprint GT Veloce - (WIP) Strada
1977 Alfetta GTV Group S - Corsa - For Sale (http://www.alfaclubvic.org.au/forum/index.php/topic,9600.0.html)
2009 159 JTS Ti

Brad M

  • Administrator
  • Hero Member
  • *****
  • Posts: 769
  • AROCA Member #: [Vic]490A
Re: Dyno Day June 2nd
« Reply #8 on: June 01, 2007, 09:55:15 AM »
Excellent, thank Phil
06 147 JTD 1.9
76 116 GT 2.0
72 105 GTV 2.0

Gone... 2x 147 GTA, 2x 90, 2x SudSprint

Next? ... http://www.alfaclubvic.org.au/forum/index.php?topic=17067

alfagtv58

  • Hero Member
  • *****
  • Posts: 1519
    • www.alfagtv.com.au
  • AROCA Member #: 3396
Re: Dyno Day June 2nd
« Reply #9 on: June 02, 2007, 05:53:12 PM »
What a great turnout!  25 cars had a run.  Thanks to all those who made it a good day.

A highlight for me was seeing Mary Lee's AWD V6 159 have a run (even if Victor wouldn't put his BMW on...we tried...hehe)
1967 Giulia Sprint GT Veloce - (WIP) Strada
1977 Alfetta GTV Group S - Corsa - For Sale (http://www.alfaclubvic.org.au/forum/index.php/topic,9600.0.html)
2009 159 JTS Ti

Colin Byrne

  • Hero Member
  • *****
  • Posts: 698
    • Vehicle Register
  • AROCA Member #: 3002
Re: Dyno Day June 2nd
« Reply #10 on: June 04, 2007, 08:07:26 AM »
Yea great day, thanks phil and everyone else that helped out
72' 105 2000 GTV Red (tarmac rally/race car)
74' 105 2000 GTV Blue (road car)
68' 105 1600 Giulia Super White (Not sure yet)
01’ Nissan Pathfinder (Tow car/Alfa support vehicle)

Scott Farquharson

  • Hero Member
  • *****
  • Posts: 1034
    • Dulux Group A GTV6
  • AROCA Member #: 2933
Re: Dyno Day June 2nd
« Reply #11 on: June 04, 2007, 10:18:59 AM »
results?
Scott Farquharson
Group A Dulux Alfetta GTV6
Group S Alfetta GTV
Alfetta GT (GTAM?)

Sheldon McIntosh

  • Hero Member
  • *****
  • Posts: 2069
Re: Dyno Day June 2nd
« Reply #12 on: June 04, 2007, 05:57:06 PM »
I have all the data on cd but can't work out which software to download from here

Quote
http://www.autronic.com/page_files/software.htm

to print out the graphs, any help much appreciated.  Unfortunately, the graphs don't have individuals names or car models anyway.

My 90 got 116hp at@6286rpm if anyone's interested.  A couple of other 2.5's got around the same mark, a TS 75 got 115, a 164 around 117.  I saw an apparently standard 3.0 75 get 144hp, and one with Q cams and maybe some breathing mods get 165hp!!

Suds and 33's all got around 70-75hp  (hee hee),  Mary Lee's 159 got 168hp from memory.  A 156 GTA got 199, an FPV F6 Typhoon looked like it had about 2000hp by the way it was trying to wrench itself off the dyno, but I thought I heard 437, and the lovely Fiat 500 managed an amazing 24hp!

Great day.  The sausages and beer and exhaust smoke was just what all those hungover heads needed.

Anyone who was there, please publish your results, would make for interesting reading.  I'm intrigued that my car made it's hp at such a high rpm when other V6's I saw all made theirs at about 5500rpm if not lower.  And my peak torque was at 2160rpm.  Is this normal?  According to my road test, my car should make peak power at 5600, and peak torque at 4000rpm.  It's only got a different exhaust tip, not a whole system.

scott.venables

  • Full Member
  • ***
  • Posts: 203
  • AROCA Member #: 3678
Re: Dyno Day June 2nd
« Reply #13 on: June 04, 2007, 06:48:34 PM »
Here's the results from my 75 2.5.  Stock except for a K&N panel filter.  It was the white one that ran before the Fiat 500. 

Peak power:  117hp @ 5300
Peak torque: 170Nm @ 2200 and again at 4600 (really flat)
And A/F ratio hovered between 11.5 and 12:1 which is probably a bit rich.

Thanks to everyone who organised and helped out, it was a great day.
Cheers, Scott

Sheldon McIntosh

  • Hero Member
  • *****
  • Posts: 2069
Re: Dyno Day June 2nd
« Reply #14 on: June 04, 2007, 10:34:00 PM »
A few piccies