Author Topic: Lower Ball Joint Press  (Read 3219 times)

0 Members and 1 Guest are viewing this topic.


  • Hero Member
  • *****
  • Posts: 807
  • AROCA Member #: 4050
Lower Ball Joint Press
« on: August 25, 2021, 02:16:09 PM »
I am in the middle of refreshing the front suspension on my 75 and had a little trouble pressing the lower ball joint back in. Previous times I have done this the lower arm was off the car making life much easier but I didn't want to remove the arm if I could help it. I did some research and decided I would try a ball joint remover. I know shinycar had some trouble using one on his car which made me a little cautious however, the unit he had appears a bit smaller than the unit I purchased. I went with a (supposedly 4WD) kit from SCA:

Reviews were really mixed but I thought if it doesn't work I will still make use of the tool in other ways. Regardless, I have now pressed both lower BJ's back in with ease and the tool is not showing any signs of wear and tear.

Note, I didn't use it to remove the BJ's. I used my reliable method of cold chisel and hammer. Working my way around carefully and they fall out.

I've attached a picture just after I had pressed one in showing the tool installed. I needed the breaker bar for torque but it wasn't hard with the bar. So in short, I would recommend it for pressing lower ball joints if you don't have a press and or don't want to remove your LCA.


  • Hero Member
  • *****
  • Posts: 773
  • AROCA Member #: 3843
Re: Lower Ball Joint Press
« Reply #1 on: August 25, 2021, 07:03:59 PM »

Yep, I originally did mine with simpler tools if I recall correctly.  Since then, I have a hydraulic press (no good unless lower arm off the car), but also have a ball joint kit like you have, which I've used for plenty of other jobs aside from ball joints (eg: recently used the cylindrical collars to remove/fit a gearbox rear mount).  Mine was from eBay!

EDIT: looking back through my photos, I used the kit I had plus my hydraulic press to fit my lower ball joints.  Your may well be more heavy duty but can't quite tell from the pics.
« Last Edit: August 25, 2021, 07:07:59 PM by shiny_car »
Giulietta QV TCT . 1.75 TBi . Magnesio Grey - Black
GT . 3.2 V6 . Q2 . Kyalami Black - Red
75 . 3.0 V6 . Alfa Red - Grey