Author Topic: EOL  (Read 1326 times)

0 Members and 1 Guest are viewing this topic.

Bazz156

  • Newbie
  • *
  • Posts: 11
EOL
« on: June 04, 2021, 09:10:41 PM »
Hi I always see EOL when discussing MES calibration. What does it stand for and when is it done?

pasey25

  • Full Member
  • ***
  • Posts: 186
Re: EOL
« Reply #1 on: June 06, 2021, 09:31:01 AM »
Hi I always see EOL when discussing MES calibration. What does it stand for and when is it done?

It End of Line

I always expected it referred to a calibration program that ran at the end of the assembly line to ensure the system collected all the information about the idle state of componenents and sensors and then ran through things like gear changes etc to ensure that it read the state of those sensors etc at different points.

It generally get run after a service or change to any key system.

I used to run it on my selespeed GTA to ensure the system knew the correct gear positions to ensure accurate shifting
Current:
1969 Lancia Fulvia 1.3s Coupe
1967 Lancia Fulvia Berlina GT 1216cc
2017 Abarth 595 Competizione
1991 Alfa SZ #440

Past:
1967 Lancia Fulvia Berlina GT 1231cc
2005 147 GTA Monza Selespeed 59/100
2001 156 Monza Selespeed Twin Spark
2010 159 TI 2.4 Sportwagon
1991 Alfa 75 Twin Spark