Author Topic: Giulietta front wheel bearing  (Read 227 times)

0 Members and 1 Guest are viewing this topic.

pafiat

  • Newbie
  • *
  • Posts: 19
Giulietta front wheel bearing
« on: September 09, 2019, 01:01:18 PM »
Hi, whats involved in replacing a front wheel bearings on a Giulietta. Who is a good source of bearings?

sportiva

  • Hero Member
  • *****
  • Posts: 549
Re: Giulietta front wheel bearing
« Reply #1 on: September 09, 2019, 02:07:44 PM »
What year model is you Giulietta
3.0 GTV6 156JTS

75 2.5
2.0 Alfetta Sportiva #22
1.8 Alfetta
1.2 alfasud
2 75 parted out
15 alfettas parted
10 gtv parted
5 alfasuds parted
156 sele

pafiat

  • Newbie
  • *
  • Posts: 19
Re: Giulietta front wheel bearing
« Reply #2 on: September 10, 2019, 03:35:18 PM »
compliance plate says 2/83. it has plastic bumpers, 1800 engine.
rgds pat

bonno

  • Hero Member
  • *****
  • Posts: 741
  • AROCA Member #: 8683
Re: Giulietta front wheel bearing
« Reply #3 on: September 10, 2019, 07:16:02 PM »
Hi Pat
Find attached extract from an Alfetta manual which should help. With regards to new bearings suppliers,  try local club sponsor or bearing suppliers in your area. Bearing  manufacturer and its corresponding bearing number is stamped on the bearing shell.
now
83 Alfetta GTV
05 156 JTS manual
past
00 156 selespeed
72 1750 GTV

pafiat

  • Newbie
  • *
  • Posts: 19
Re: Giulietta front wheel bearing
« Reply #4 on: September 11, 2019, 04:30:29 PM »
thanks for the info. Quite old school! I'm used to Fiat X1/9's with dual row balls and fancy retainers. This is just like my trailer. Not a bad thing!