75 series air con compressor make, model

Started by MD, December 19, 2016, 09:37:07 PM

Previous topic - Next topic

Colin Edwards

The pulley is machined steel. 
After some fairly agressive cleaning the outer race "D" looks like 42mm.  "d" is 20mm and "B" 16mm.
Definitely not a 6204 or 6304. 
Bearing now looks like its been pressed in against a shoulder in pulley. 

Present
2023 Tonale Veloce
2018 Abarth 124 Spider
1987 75 3.0

Past
2020 Giulietta Veloce
2015 Giulietta QV
2009 159 3.2 Ti Q4
2012 Giulietta TCT Veloce
2006 147 Ti 2 door Selespeed
1979 Alfasud Ti 1.5

Colin Edwards

Present
2023 Tonale Veloce
2018 Abarth 124 Spider
1987 75 3.0

Past
2020 Giulietta Veloce
2015 Giulietta QV
2009 159 3.2 Ti Q4
2012 Giulietta TCT Veloce
2006 147 Ti 2 door Selespeed
1979 Alfasud Ti 1.5

bazzbazz

I asked as you can press out the steel pullies but the plastic ones are a replace scenario.
On The Spot Alfa
Mobile Alfa Romeo Diagnostic/Repair/Maintenance/Service
Brisbane/Gold Coast
0405721613
onthespotalfa@iinet.net.au

Colin Edwards

Thanks.
Must be an aggressive class of fit.  Heated it up to 200C and gave it a good wack with my preferred adjustment tool - no joy! 
Next stop the 20T press.  SKF have 63004's on the shelf.
Present
2023 Tonale Veloce
2018 Abarth 124 Spider
1987 75 3.0

Past
2020 Giulietta Veloce
2015 Giulietta QV
2009 159 3.2 Ti Q4
2012 Giulietta TCT Veloce
2006 147 Ti 2 door Selespeed
1979 Alfasud Ti 1.5