« previous next »
Pages: [1]

Author Topic: Selespeed oil level  (Read 5339 times)

0 Members and 1 Guest are viewing this topic.

jimay3677

  • Guest
Selespeed oil level
« on: August 11, 2014, 08:12:33 PM »
Ok so I went out to do the weekly engine oil top up and selespeed oil check. I opened the drivers door and checked the level and it was bang on min.  I walked back to the shed to grab some fluid pulled the selespeed cap off and it was dead on max. Opened driver door again and still on max after three checks, what the??

Sent from my GT-I9305 using Tapatalk
Logged

jimay3677

  • Guest
Re: Selespeed oil level
« Reply #1 on: September 04, 2014, 07:52:08 PM »
Duh I had no idea there were different measurements on the dipstick

Sent from my GT-I9305 using Tapatalk

Logged

Alfa156Melb1

  • Full Member
  • ***
  • Posts: 135
    • Photography
  • AROCA Member #: 4593
Re: Selespeed oil level
« Reply #2 on: September 11, 2014, 09:48:29 PM »
Been in Rutherglen for a couple of weeks now.. still haven't seen you around!!! You mustn't be driving her enough!!  8)
Logged
Touring Coordinator
2002 156 GTA | Q2 | 330mm Brakes | Mille Miglia | Bilstein B14 Coilovers | Koni ARB's
R.I.P. 2003 156 JTS | Eibach Pro Kits | Bilstein B8

Photography - www.davehewison.com

jimay3677

  • Guest
Re: Selespeed oil level
« Reply #3 on: September 13, 2014, 02:09:04 PM »
Yeah I work in wang. I'm often at iga just after 4:30

Sent from my GT-I9305 using Tapatalk

Logged

Kulwinder

  • Jr. Member
  • **
  • Posts: 61
Re: Selespeed oil level
« Reply #4 on: March 28, 2015, 04:58:21 PM »
Check dipstick both sides. One side has min/max levels when cold. Other side has min/max levels when at 90degrees (hot). Don't be confused


Kulwinder Singh
Logged
Pages: [1]
« previous next »