Hi to all,
Does any know where I can get a new 2 1/2 inch pre made exhaust system for a 2 litre Alfetta GTV.
Standards are 2'
Can't recommend anywhere in particular (unless you're in Perth), but if you go to a half decent exhaust shop they should be able to fabricate something on the spot to order for reasonable price.
On the recommendation of a fellow Perth member four years ago, I went to a guy at a local exhaust shop and he manufactured an entire front half system for my '81 GTV (collector to centre box, but also new rear mounts) inside a day for under $350. Obviously, some inflation since then but all you can
Thank you poohbah,
My car is not drivable at the moment and I need a temperary exhaust so I can start the engine and not get my neighbours upset.
Does anyone have 2 1/2' rear section of the exhaust pipe muffler for a GTV 4 cylinder. :(
In that case, maybe try online - there's a mob based here in WA (The Fiat Factory Australia) advertising a brand new stock Alfetta GT/GTV exhaust system for $850 on ebay. Made by IMASAF in Italy.
the standard is 1.75inch exhaust the group 1 105 gtv used a 2 inch
there is possiblty room for a 2.25inch but i think 2,5 inch wont fit and will reduce performance
Quote from: carlo rossi on March 22, 2023, 11:00:41 AM
there is possiblty room for a 2.25inch
Yes, 2.25" will fit.
I would suggest 2 1/2 is too big unless you have significant breathing mods.
There are race applications that have smaller diameter.
But, if you can weld, you can make your own.
Hi NSharpley,
I have a 3.2 24v v6 Busso in my Alfetta GTV, It started life as a 4 cylinder car.
All the running gear is v6 but I kept the 4 cylinder fuel tank.
I am also after a v6 propshaft with the splined front shaft.
And a GTV6 isostatic gear rod and then my car is complete.
Regards
Ah! V6. Say no more ...
GTV is coming together really good , like a new car. :)