Alfa Romeo Owners Club of Australia Forum

Technical => 105/115 Series (105 Coupe/Spider/Berlina) => Topic started by: Campbeli on April 12, 2021, 07:31:54 PM

Title: 105 jack point for quick jack
Post by: Campbeli on April 12, 2021, 07:31:54 PM
I've bought a quick jack for the workshop. https://www.quickjack.com.au/
Goes great for the 147 with pinch seam rubber blocks, and now i'd like to lift the 105 GT junior.
I'm concerned lifting under the factory jack points (for the battini) will crush the square channel.
Any suggestions on what good lift points would be using a quickjack?



Title: Re: 105 jack point for quick jack
Post by: vin sharp on April 16, 2021, 05:45:53 PM
You won't have any issue with using the square tube jacking points, so long as the floor they are attached to is sound.
I lift using the factory points all the time, never even looked like an issue. The material is quite robust.
Title: Re: 105 jack point for quick jack
Post by: Campbeli on April 22, 2021, 05:58:50 PM
Thanks Vin, i'll give it a try.....carefully