Print Page - Local source for front wheel bearing seal

Title: Local source for front wheel bearing seal
Post by: GTVeloce on September 23, 2019, 04:48:12 PM

I bought and have installed a front wheel bearing kit however, the seal doesn't fit. Does anyone know where I can source a set of seals in S-E Melbourne? I tried Benincas but they didn't have any. Does anyone know the correct size?

This is for a 75 TS hub.

Title: Re: Local source for front wheel bearing seal
Post by: bonno on September 23, 2019, 05:31:42 PM

Hi GTVeloce
Is there any markings on the seal?. If so, try and procure an equivalent from your local bearing suppliers. I have attached an extract of the standard Seal numbering system for reference purposes.

Title: Re: Local source for front wheel bearing seal
Post by: GTVeloce on September 24, 2019, 08:31:19 AM

Thanks bonno, that looks very useful. Unfortunately I disposed of the old seals some time ago so don't have any to compare to. I am about to disassemble a working hub so should be able to look then. Was hoping to have everything in place beforehand to minimise downtime of the car.

Title: Re: Local source for front wheel bearing seal
Post by: Mick A on September 28, 2019, 02:30:54 AM

Easy one, have plenty at work, you can collect Monday if you like.

I'll send you a PM.

Alfa Romeo Owners Club of Australia Forum

Technical => 116 Series (Alfetta Sedan/GT/GTV & Giulietta Sedan) => Topic started by: GTVeloce on September 23, 2019, 04:48:12 PM