Hey ... the rear gearbox mount/bush ... its just a press-fit right?
Tap it out with a suitable sized socket, yes? Or does it require something a little more serious?
Quote from: sportiva on March 04, 2018, 09:27:25 PM
You will probably need to make or buy a tool like in the photo. Tapping with a socket will probably be a wasted effort as the bushes can be very tight
What ever method you try, to remove the bolt easily you must take the weight of the transaxle by jacking it up slightly then pull the bolt out then lower the transaxle to expose the bush
Good luck
Figured as much, thanks.
The trans-axle is already out of the car so no problem there ...