Print Page - does a series 3 hatch fit a series one 33

Title: does a series 3 hatch fit a series one 33
Post by: meizhak on July 09, 2010, 11:56:10 AM

hi guys,

does a series 3 alfa 33 hatch fit a series 1

cheers

meizhak

Title: Re: does a series 3 hatch fit a series one 33
Post by: philpot on July 09, 2010, 10:07:11 PM

Ummm...first reaction would be no. Own a series one '85 build 33ti and a '90 series three 16V. Will post photo's when able on sunday, but the 16V has a different shape cut out at the base of the hatch, ie the lid cuts down into the panel between the lights. In the 33ti the base rubber is a straight line from side to side...the glass is much more curved also in the s3...Oh, and the s3 spoiler which sits so neatly on the rear of the s3 hatch , when placed on a s1 is a lot narrower than the below rear-window panel. Think the dimensions are quite different...

Title: Re: does a series 3 hatch fit a series one 33
Post by: meizhak on July 10, 2010, 11:56:15 AM

cheers philpot, my hatch on my s1 is screwed, know of one from a s3 that i could of had, but if it dont fit no prob I will keep looking for a good one to fit.

meizhak

Title: Re: does a series 3 hatch fit a series one 33
Post by: Martinsifredi on July 17, 2010, 10:50:55 AM

Hy there, Try contacting italian Job in Oakleigh , they have many spares available .

martin

Alfa Romeo Owners Club of Australia Forum

Technical => 900 Series (Alfasud, Alfasud Sprint, 33) => Topic started by: meizhak on July 09, 2010, 11:56:10 AM