Print Page - 1983 GTV6 Wheel Specs for correct offset

Title: 1983 GTV6 Wheel Specs for correct offset
Post by: Mile Jurcic on November 02, 2010, 10:12:26 AM

HI Guys,

Just wondering if anyone has the correct specs as per below attachment as im ordering some wheels and need to get the offset right.

I need particularly need (E) Protrusion of caliper past mounting surface, (A) Mounting surface to firts obstruction chassis side and (B) Mounting surface to inside fender.

Thanks for your help.

Cheers
Mile.

Title: Re: 1983 GTV6 Wheel Specs for correct offset
Post by: martym00se72 on November 03, 2010, 06:40:49 PM

ET35 should see you right depening on wheel size you are going for. Stock was et41. I have gone 17x8 et35 wearing 225/45R17 - I have minor scrubbing issues on the outside at the front only on top of guard - working on suspnsion to resolve this (fresh torsion bars of 27mm variety, bushes, ride height corection as currently too low etc etc). No clearance issues on inner components.

Title: Re: 1983 GTV6 Wheel Specs for correct offset
Post by: Mile Jurcic on November 05, 2010, 12:54:09 PM

Thanks Marty, appreciate your feedback.

Cheers.
Mile

Alfa Romeo Owners Club of Australia Forum

Technical => 116 Series (Alfetta Sedan/GT/GTV & Giulietta Sedan) => Topic started by: Mile Jurcic on November 02, 2010, 10:12:26 AM