Hi all wanted to buy for 83 2 lt GTV the top up tank for coolant that sits up near firewall next to windscreen washer bottle, mine is cracking grrrr
cheers Drew
Drew
Is that the same as the GTV6 tank?
If so, you might be able to get a new one from The Italian Job which lasts about a year before it surrenders to the pressure of a healthy well maintained cooling system with no leaks, new head gaskets.
There is a dodgy looking second hand one on ebay in the US.
There is a company in the US that makes alloy tanks for about $US 300
Or there is a company in NSW or QLD that fabricates them out of alloy (search for previous cooling system thread).
I am most likely going to order one of these later this year, maybe a there is a discount for a group order?
Expression of interest anyone? ;)
Al
International auto parts from the US
Sell the best aluminium coolant tank for the 81 - 87 GTV6.
These have a sight tube and brass fittings US$192.
The Aus one mentioned was of a much lower standard.
John
hi drew,
i found mine, if ur intrested?
brad,
John
Thanks for your comments.
I guess now is not a bad time to order one with the exchange rate at 90c to the US dollar.
Only problem is the cost of getting it to Australia, IAP were quoting around $200 if I remember correctly.
Seems a lot doesn't it? I might need to research that one a bit more.
Drew, sorry for erroneous cost, I must have been thinking A$!
Alan
hi,
i got a price from the american supplier called international auto customs, this tank has the sight tube, $192US, and $55US Postage, and they do have stock at the moment, if there is interest i would be part of a bulk buy.
cheers michael :)
Hey Mate,
cool bananas, yer sent you a txt hadnt checked on here yet, how much you want for them including the other cpl bits of console ? maybe txt me if you like
cheers Drew ,
p.s. would love to grab them one nite this week or weekend..
Quote from: BradGTV on February 24, 2010, 05:55:19 PM
hi drew,
i found mine, if ur intrested?
brad,
Hi guys ,
not sure if GTV6 same as 2lt, would be interested down the track later this year round August in getting a stainless or similar when i get my tax back and spend a bit on her..
cheers Drew
I think I have one from my electric conversion, which is surplus to my needs. I'll check tomorrow morning to confirm. I'll assume a 84 gtv would be identical.
Thanks everyone, one found and sorted
Cheers for help as always fantastic..
Drew
Michael, have you seen a photo of the International Auto Customs tank?
The IAP tank looks good in the photo on their website and a bloke elsewhere in this forum has one and reckons its a good fit.
I have just sent an email to IAP to confirm delivery costs, I don't want to depend on my dodgy memory. I asked them is there is a savings on delivery if I order more than one.
I'm not saying I'm not interested in the IAC tank, just want to check out all avenues first. Is it possible the tanks come from the same manufacturer, the IAP tank US$192 also has a sight tube??
Cheers
Alan
The site tube enables you to check the coolant level without moving the cap 8).
John
Alan,
I did see a picture on there website and i want to purchase one, i figured if others are keen we might save a little in costs with a bulk purchase. [depends on stock], if you get a favourable reply from them and you wish to order one i am in. Maybe we are talking about the same tank ,part number 28273 on their listing.
regards michael
Michael
IAP has changed their courier to another company. They are quoting $55USD to courier to Melbourne (was $180!!!)
I asked the question about ordering more than 1 tank, no response. Probably wouldn't save us much ordering 2, and it keeps things simple.
Before I go ahead I'm going to ask the boys as Maranello Pur Sang if there is any down side to the ally tank.
Alan
Alan,
thanks, i will put off ordering mine until you hear if there are any problems. If you could post up the reply you get that would be appreciated.
cheers michael :)
Here's the thread on alfagtv6.com where the tanks were first discussed, purchased, tested, and refined: http://alfagtv6.com/phpBB3/viewtopic.php?f=7&t=20. Seems there were some fitting problems at first, but these have been resolved.
They're the same tanks that are now sold through IAP (as far as I can tell).
Evan you are correct Canton Racing Products tanks sold via IAP.
John
Michael, have been flat out at work, will talk to Maranello PurSang next week.
Evan thanks for the link to the alfagtv6.com thread!!
Alan
hi all,
I received my alloy coolant tank today from IAP, what a work of art, looks sensational.
cheers michael ;D ;D
Well done Michael! I am sorry to say that I have achieved exactly nothing on that score :P
Still intending to, just slipped down my list of priorities a little.
Love to hear more about the tank, how neatly it installs, modifications to hose lengths...?
Alan
alan,
that will be this weekends little job, i will let you know how it goes.
cheers
this has turned into a small nightmare, the bloody holes dont line up, i thought these guys fixed this issue.
cheers michael >:( >:(
hi all,
well after the initial dissapointment of the holes not lining up, all is good, it only required a drill to open up the holes a little, i must say these are a quality item.
cheers michael
HI grpa9x
What $$$$$$$ did it end up costing you delivered
noticed today small bubbles of coolant on my tank it has a crack in the top flat area not in a seam or a corner
Cheers Glen
sportiva#22,
It ended up at around $250 aus, landed.
cheers michael