Alfa Romeo Owners Club of Australia Forum

State Divisions => Queensland => Topic started by: gojko69 on October 23, 2014, 08:13:58 AM

Title: ALFA GT SELESPEED STUCK IN 1ST
Post by: gojko69 on October 23, 2014, 08:13:58 AM
Hi all,

my 2008 GT 2.0 JTS Selespeed is stuck in 1st gear. 102,000km on the clock. Getting a "Selespeed Failure" on the dash. Checked the fuses (engine bay & under steering wheel), all good there. I can hear the pump priming when driver door open, enough oil in the system. Did an ECU & throttle reset (battery off for 45 minutes etc...), no joy. Any ideas at least how to get it to neutral so that I can move it at all (car in garage, hard to get it on a tow truck)? Any ideas what might be the problem? I'm Gold Coast based, who/which Alfa service is a really good Selespeed expert and won't rip me off? Many thanks...

Dragomir
Title: Re: ALFA GT SELESPEED STUCK IN 1ST
Post by: MSM47 on October 29, 2014, 12:51:34 PM
Hi, I don't have selespeed but try Maranello in Burleigh Heads 0755220424, he is ex Alfa mechanic. He services mine not sure what he is like on selespeed?