Recent posts

#1
Buy/Swap/Sell [Announce ONLY] / F.S. Rebuilt Transaxle
Last post by MD - Today at 08:43:15 PM
Rebuilt Alfetta/GTV Transaxle

1.Full case cleaning inside and out.
2.Synchromesh rings, dogs, and hubs either replaced for units in excellent
  condition or rotated as appropriate for best performance.
3.New pinion bearing as precaution. All other bearings ,good.
4.New input shaft and selector shaft seals
5.Newly machined and lightened clutch flywheel, new clutch disc and new low
  profile Japanese pressure plate installed.
6.Rear rubber suspension good.
7.Function switches all repaired.
8.Speedo drive function tested, good.
9.Breather vent cleaned.
10.Fresh 75W90 mineral oil filled as per factory      specs.
11.Clucth input shaft rubber coupling in good serviceable condition
12.All new casing assembly bolts and nuts.
13.Open 4.1:1 differential.

$2,950 plus shipping.

Free delivery to Brisbane metropolitan area.
Phone contact me on ofouronenine,triplefour,doublesevenfive. Or leave message on Forum.
#2
Buy/Swap/Sell [Announce ONLY] / 105 Carrello Lights
Last post by hylandian47 - Today at 04:17:04 PM
Left over from various restoration projects the following "used" lights.
Carrello 072-45-800 ;3 of.    072-40-800; 2 of.  072-46-800 1 of. 084-80-800 4 of.
Let me know what you need and we will do a deal.
#3
Buy/Swap/Sell [Announce ONLY] / 105 GTV Carpet
Last post by hylandian47 - Today at 04:10:34 PM
Complete new and unused 105 GTV Boot Carpet only. CA part number IN059, Black with vinyl bound edges. 7 Pieces in total. Unused in my latest restoration, i used rubber instead. Price $290 ex Goldcoast
#4
Buy/Swap/Sell [Announce ONLY] / 105 Exhaust components
Last post by hylandian47 - Today at 04:04:55 PM
I have available the above new unused exhaust components. EX007 Front exhaust section, EX012 Middle Section, EX034 Fitting Kit, EX047 Rear Muffler.  Complete setup only $580 ex Goldcoast. Photos available on request, too large for Forum site.
#5
Buy/Swap/Sell [Announce ONLY] / Giulia Super Seats
Last post by hylandian47 - Today at 03:58:07 PM
Surplus to my GS restoration, A very good pair of front seats out of a 1970 GS. Original charcoal viyl, some splitting on drivers seat stitching, absolutely complete with seat slides and adjust levers. More photos on request. Price $700 pair.
#6
It has a plastic shell
#7
Queensland / Re: Alfetta GTV 2000 1978 Driv...
Last post by festy - May 03, 2024, 11:04:11 AM
The cable is easy to replace if the regulator is still ok (i.e. if the plastic tabs that hold the cable ends haven't broken off).

If your cable has been damaged, it may be a sign that you need to replace the top and bottom pulleys in the door frame.
Concave rollers for sliding doors work well as replacements, something like https://www.bunnings.com.au/rolltrak-32mm-nylon-concave-roller_p3961451

#8
General Discussion / Re: Corrosion Awareness Day
Last post by MD - May 02, 2024, 06:52:51 AM
...and you would think Italian wiring would have the jump on everybody. After all, Marconi invented radio ? A possible confusion between spaghetti and wiring ?

I don't believe that and I know you don't believe that either  ;D

Actually, Italian communications equipment is first class.
#9
General Discussion / Re: Corrosion Awareness Day
Last post by poohbah - May 01, 2024, 03:42:59 PM
I've been driving my 81 Alfetta GTV to work the last few days, and with the first wet weather in months, I quickly rediscovered that I get a choice of running any 2 of 3 the following functions at one time, but never all three at once: - wipers and headlights,  wipers and heater/demister, heater/demister and headlights ...

Much better when driving in the wet during daylight hours, then I can run the wipers and listen to the stereo, as long as I wind down my window to keep the screen clear!
#10
Buy/Swap/Sell [Announce ONLY] / Re: WTB. 3.2 Busso pistons and...
Last post by ALFAAA - May 01, 2024, 06:42:17 AM
 Hi to all, whats the price of a good condition low K's 3.2 24v Busso going for these days.