'cause I figured it is atleast interesting and maybe helpful.................... :o
Some comparisons are added if I have them.
Power Steering Pump - 3.5kg
Fan and Motor (no shroud) - 2.2kg
(14" SPAL Fan/Shroud 2.4kg)
Lower Control Arm with a ball joint and chassis mount - 7.2kg
24mm Front ARB with 1 LCA link - 5.5kg
1 V6 Exhaust Manifold - 4.4kg
(Custom made 500mm long, 1.5" primary pipe extractor - 3.1kg)
V6 Air Filter Box and Filter Element (no AFM) - 2.4kg
(BA/BF Falcon Box/Element - 1.8kg)
Bonnet - 17.4kg
Front Guard - 4.5kg
V6 Plenum Chamber and Throttle Body - 3.6kg
Standard Potenziata Wheel/Tyre - 16.3kg
(Series 6 RX7 16x8 rim with a 215/45/16 tyre - 15.4kg)
Front Impact Absorbing Bumper Bar (no mounts) - 17kg
Non Impact Absorbing Bumper Bar (no mounts) - 5.2kg
I've kinda focussed on stuff that could be replaced with other components that are lighter and/or achieve a better result for similar weight (like comparing the 2 fans). So I haven't weighed, say a cylinder head or the rear engine mount.
If others could add info about stuff they've weighed, that'd be great.
Yes, interesting.
I'll add:
269mm front disc (incl studs) - 6.0kg
front Brembo caliper (incl pads + pins + spring clip) - 2.8kg
(159 Brembo 4-pot caliper (incl pins + pads) - 4.0kg)
How much do the v6 and ts motors weigh?
A few more smaller and lighter things.
Air conditioner compressor, mount and belt tensioner - 9kg
AC Condensor - 2.2kg
AC Drier - 0.925kg
Charcoal canister - 1.5kg
Horns - 0.685kg
Can anyone weigh the the brake booster, booster mount, brake pedal mount and cross over shaft?
Hey Duk,
I've got a booster with shaft and a pedal box in the shed. I'll try to remember to weigh them this weekend.
Cheers
Steve
Adelaide
Does anyone have a hood lining out of a 75 that they could weigh for me?