Have just done a compression test on a JTS engine. Came in at. 155. 155 155. 180. Can any folk tell me how these values compare to others who have also tested. Cheers
Sent from my iPhone using Tapatalk
Shouldn't be too different to a TS engine, if the tests were carried out correctly you have most likely a head-gasket sealing issue. From memory I've seen 180-210 on my TSs.
Ouch. That's not good. I will have another crack at it but did seem odd that only one cylinder 180. Fairly sure no head gasket issue. Motor has done 160 000 km , Have driven the car briefly as Is unregistered and seemed to be going ok . I acquired the car for a case so all is not lost. Cheers.
Sent from my iPhone using Tapatalk
It could simply be mistimed, too.
Cheers will persevere before writing it off. Thanks for your help.
Sent from my iPhone using Tapatalk