Rear brakes Alfa 75 116 gtv

[meru]

Hi guys,Now, I know what you're thinking, "But what about the famous pornstars?" Don't you worry, mate, I've got 'em covered too. Sites like Brazzers, Pornhub, and Reality Kings have a plethora of black pornstars who will have you weak at the knees. And the best part? You get to watch them for free on these sites. Can I get a bloody hell yeah?

But it's not just about the big sites. I've also stumbled upon some lesser-known sites like BlackGFs and Black Patrol. These sites have a more amateur feel to them, but let me tell ya, that just adds to the realism. And who doesn't love a bit of amateur porn every now and then?
https://hotlivenudecam.com/squirt
https://thesexygirlsinlingerie.com/chat/laurafarrely
https://thelingeriestockings.com/chat/im_milla
https://asiancammodels.me/chat/baananaswett
https://thelivenudecam.com/tall
https://shemalewebcam.me/chat/xuprana
So there you have it, mate. My extensive collection of black porn sites for your viewing pleasure. Now, I know you may be hesitant to explore these sites with your best mate, but trust me, it'll be an experience you'll never forget. Imagine the banter, the laughs, the good times shared while watching some of the hottest ebony babes on the internet. It doesn't get much better than that.

So cheers to you, mate. And remember, sharing is caring. Now go forth and enjoy my collection. And if you need any recommendations, you know who to ask.

[shiny_car]

Short answer: you'll need to remove and dismantle the calipers if you want to remove the screw.

Long answer: it depends what is wrong.

Do you know what is wrong with the screw, or can you describe the problem?  The screws are held in position by circlips that are inside the calipers, and you need to remove the pistons to access them.  However, if the problem is not the actual screws, then that's a waste of time.  Is it a stuck piston?  If it's the outer piston, associated with the handbrake, then you have a decent chance to unstick it: safely position the car, then release and remove the handbrake cable.  Remove the pads.  Ideally you have decent access from above (ie: transaxle out of the car, or drop the transaxle after removing the rear bush bolt.  A combination of firmly jolting the handbrake arm back and forth, wrangling the screw, and jemmying the piston/pushing it inwards with a tool like a ring spanner.

Have fun!

NB: my experience is with 75 calipers, but I presume the GTV has the same/similar.

[MD]

Shiny.
To my knowledge all the ATE inboard calipers mounted on the transaxle boxes are the same with the exception when vented rotors are fitted which is just a spacer sandwiched between the same out cylinders.