Panel shop

Started by 328stig, November 25, 2012, 05:18:18 PM

Previous topic - Next topic

328stig

can anyone help me with the name of the best panel shop in Sydney. I want a full bare metal/rotisserie but i want the best.... :)

Two Dogs

You may need to state what "the best" is. I recently did some investigation and "the best" was $25,000 and had to wait for a year before it could be started and that the process would take about one year (for a 79 Alfetta Sedan).

This panel shop drills out every panel to inspect repair and re-assemble and then paint. Especially in the case of early Alfa's the rust inside sills etc is a big concern. Whilst I was there I had a look at some examples of what that means, it was amazing.

Two Dogs

328stig

best quality... not done to a price. :)


Cool Jesus

Don't forget AROCA clubmember and sponsor. Old school metal fabricators and experienced craftsman.

http://www.still-one.com.au/restorations/restorations.htm
Present:
* '76 Alfetta GTAm 2.0 (project)
* '03 147 2.0 TS
*'12 159 Ti 1750 TBi
===================
Past:
* '10 159 2.2 JTS
* '89 164 3.0
* '98 Spider 2.0 TS