Author Topic: Panel shop  (Read 3749 times)

0 Members and 1 Guest are viewing this topic.

328stig

  • Newbie
  • *
  • Posts: 20
Panel shop
« on: November 25, 2012, 05:18:18 PM »
can anyone help me with the name of the best panel shop in Sydney. I want a full bare metal/rotisserie but i want the best.... :)

Two Dogs

  • Jr. Member
  • **
  • Posts: 57
Re: Panel shop
« Reply #1 on: November 26, 2012, 09:24:08 AM »
You may need to state what "the best" is. I recently did some investigation and "the best" was $25,000 and had to wait for a year before it could be started and that the process would take about one year (for a 79 Alfetta Sedan).

This panel shop drills out every panel to inspect repair and re-assemble and then paint. Especially in the case of early Alfa's the rust inside sills etc is a big concern. Whilst I was there I had a look at some examples of what that means, it was amazing.

Two Dogs

328stig

  • Newbie
  • *
  • Posts: 20
Re: Panel shop
« Reply #2 on: December 02, 2012, 09:00:41 AM »
best quality... not done to a price. :)

dfrye

  • Full Member
  • ***
  • Posts: 117
Re: Panel shop
« Reply #3 on: January 20, 2013, 08:23:05 PM »

Cool Jesus

  • Hero Member
  • *****
  • Posts: 1032
  • AROCA Member #: 8398
Re: Panel shop
« Reply #4 on: January 24, 2013, 09:20:54 PM »
Don't forget AROCA clubmember and sponsor. Old school metal fabricators and experienced craftsman.

http://www.still-one.com.au/restorations/restorations.htm
Present:
* '76 Alfetta GTAm 2.0 (project)
* '03 147 2.0 TS
*'12 159 Ti 1750 TBi
===================
Past:
* '10 159 2.2 JTS
* '89 164 3.0
* '98 Spider 2.0 TS